Electrolux EOD3C00X User Manual page 28

28 www.electrolux.com
12.4 How to use: Catalytic
cleaning
There are catalytic panels in the cavity. It
absorbs fat during catalysis.
Turn off the oven and wait
until it is cold.
Step 1
Set the function and the
oven temperature:
250 °C
Duration: 1 h
12.5 How to use: Aqua Clean
This cleaning procedure uses humidity to
remove remaining fat and food particles
from the oven.
Step 1
Step 2
12.6 How to remove and install: Door
The oven door has two glass panels. You can remove the oven door and the internal
glass panel to clean it. Read the whole "Removing and installing door" instruction
before you remove the glass panels.
CAUTION!
Do not use the oven without the glass panels.
Step 1
Step 2
Before the catalytic cleaning
Remove all accessories.
Clean the oven with catalytic cleaning
After cleaning, turn the knob
for the oven functions to the
Pour water into the cavity
embossment: 200 ml.
Set the function:
Press: .
Open the door fully and hold
both hinges.
Lift and turn the levers fully on
both hinges.
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Step 2
off position.
Step 3
Step 4
Step 5
Step 6
.
Clean the oven floor and
the inner door glass with
warm water, soft cloth and
mild detergent.
Step 3
When the oven is cold,
clean the cavity with a
wet soft cloth.
Set the temperature to
90 °C.
Let the oven work for 30
min.
Turn off the oven.
Wait until the oven is cold.
Dry the cavity with a soft
cloth.