Electrolux EOD3C00X User Manual page 29

Step 3 Close the oven door halfway to
the first opening position. Then
lift and pull forward and remove
the door from its seat.
Step 4 Put the door on a soft cloth on a
stable surface.
Step 5 Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the
clip seal.
Step 6 Pull the door trim to the front to
remove it.
Step 7 Hold the door glass panel by its
top edge and carefully pull it out.
Make sure the glass slides out of
the supports completely.
Step 8 Clean the glass panels with wa‐
ter and soap. Dry the glass pan‐
els carefully. Do not clean the
glass panels in the dishwasher.
Step 9 After cleaning, install the glass
panel and the oven door.
The screen-printing zone must face the
inner side of the door. Make sure that
after the installation the surface of the
glass panel frame on the screen-printing
zones is not rough when you touch it.
When installed correctly the door trim
clicks.
Make sure that you install the internal
glass panel in the seats correctly.
2
B
ENGLISH 29
1
A