Ethernet Cable - Mitsubishi Electric MELSERVO-JET User Manual

Ethernet cable

For Ethernet cables used for network wiring, refer to "Communication specifications" in the User's Manual (Communication
Function).
A commercially available product example is as follows. For the latest product information, contact the manufacturer.
Product name
Ethernet cable For indoor use
For moving parts
used indoors
For indoor and
outdoor use
For commercial cables other than the above, refer to the CC-Link Partner Association website.
https://www.cc-link.org/en/
Precautions
• When branching the CC-Link IE TSN network using a switching hub, use a switching hub (Class B) that is recommended by
the CC-Link Partner Association. Although a switching hub (Class A) can also be used, there are restrictions on the type of
topology that can be used. For further information, refer to "MELSEC iQ-R Motion Module User's Manual (Startup)".
• When branching the CC-Link IE Field Network Basic network using a switching hub, use a switching hub with a
transmission speed of 100 Mbps or more. When using a switching hub without the auto-negotiation function, set the
transmission speed to 100 Mbps and half duplex.
Model Specifications
SC-E5EW-S_M "_" in the model represents the cable length (0.5 m,
1 to 100 m (in 1 m increments)).
SC-E5EW-S_M-MV "_" in the model represents the cable length (0.1,
0.2, 0.3, 0.5 m, 1 to 45 m (in 1 m increments)).
SC-E5EW-S_M-L "_" in the model represents the cable length (1 to
100 m (in 1 m increments)).
Double shielded (Category 5e)
6 OPTIONS AND PERIPHERAL EQUIPMENT
6.1 Cables/connector sets
6
61