BorMann BGC1350 Manual page 11

WALL CHASER
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high­
quality product. The operating instructions
are part of this product. They contain important in­
formation on safety, usage and disposal. Before
using the product, familiarise yourself with all hand­
ling and safety guidelines. Use the product only
as described and for the range of applications
specified. Please also pass these operating instruc­
tions on to any future owner.
Intended use
The wall grinder (standard nomenclature: abrasive
cutting appliance), hereinafter referred to as the
appliance, is designed for making cuts or slits
(without the use of water) in firmly supported and
primarily mineral materials such as concrete or ma­
sonry, using the guide carriage and in combination
with an approved industrial dust extractor. Any
other usage of or modification to the appliance
is deemed to be improper and carries the risk of
serious personal injury. Not for commercial use.
Features
0
ON/OFF switch
f) Handle
E) Dust extraction adapter
� Union nut
0
Blade guard
0
Mounting flange (with thread)
0
Locking screw for the depth stop
8
Depth stop
8
Additional handle
0
Safety lock-out
Ui) Spindle lock
ID
Roller
� Reducer
� Centring flange
6) Intermediate layers
Gl) Face spanner
0
Hand chisel
Package contents
1 wall chaser
2 cutting discs (pre-fitted)
1 face spanner
1 dust extraction adapter (pre-fitted)
1 reducer (for use with the dust extraction adapter
and a dust extractor hose of '/J 32 mm)
1 hand chisel
1 operating manual
Technical data
Input voltage:
Power consumption:
Rated speed:
Washer 0:
Central fixing bore:
Groove depth:
Groove width:
Thread:
Protection class:
Weight:
A
General Power Tool
Lil
Safety Warnings
�WARNING!
► Read all safety warnings and all instruc­
tions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-op­
erated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
220-240V-50-60Hz
(Alternating current)
1350W
1
0-9000 min·
125 mm
22.2 mm
0-30 mm
8-26 mm
Ml4
11/[Q]
approx. 3.9 kg