Changing The Remote Codes - Brother MFC MFC-295CN User Manual

Chapter 7

Changing the remote codes

If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 5 1 (l 9 1 for
New Zealand). The preset Remote
Deactivation Code is # 5 1 (# 9 1 for New
Zealand). If you want to, you can replace
them with your own codes.
a
Press Menu, 2, 1, 4.
1.Setup Receive
4.Remote Codes
b
Press a or b to choose On (or Off).
Press OK.
c
Enter the new Remote Activation Code.
Press OK.
d
Enter the new Remote Deactivation
Code.
Press OK.
e
Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, , #.
• Remote Codes might not work with some
telephone systems.
50
7