How To Reset The Machine; Packing And Shipping The Machine - Brother MFC MFC-295CN User Manual

How to reset the machine

a
Press Menu, 0, 7.
(Menu, 0, 6 for New Zealand.)
b
Press a or b to choose the reset function
you want to use.
Press OK.
c
Press 1.Reset or 2.Exit.
d
Press 1 to confirm.
128
Packing and shipping
B
the machine
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
properly pack your machine. Damage caused
to your machine during transit is not covered
by your warranty.
IMPORTANT
It is important to allow the machine to
'park' the print head after a print job. Listen
carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a
Open the ink cartridge cover.
b
Press the lock release lever to release
the ink cartridge and take out all the ink
cartridges. (See Replacing the ink
cartridges on page 119.)
c
Install the green protective part, and
then close the ink cartridge cover.
B