Dial Tone Detection; Telephone Line Interference - Brother MFC MFC-295CN User Manual

Dial Tone detection

When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the default No Detection setting.
a
Press Menu, 0, 5.
b
Press a or b to choose Detection or
No Detection.
Press OK.
c
Press Stop/Exit.
Troubleshooting and Routine Maintenance

Telephone line interference

B
If you are having problems sending or
receiving a fax due to possible interference
on the telephone line, we recommend that
you adjust the Equalization for compatibility
to reduce the modem speed for fax
operations.
a
Press Menu, 0, 6.
(Menu, 0, 5 for New Zealand.)
b
Press a or b to choose Normal (or
Basic(for VoIP)).
Basic(for VoIP) cuts the
modem speed to 9,600 bps. Unless
interference is a recurring problem
on your telephone line, you may
prefer to use it only when needed.
Normal sets the modem speed at
14,400 bps. (Default)
Press OK.
c
Press Stop/Exit.
Note
When you change the compatibility to
Basic(for VoIP), the ECM feature is
only available for colour fax sending.
B
B
109