System Setup [Sys]; Sleep Timer [Slp] - Canton Smart Soundbar 10 Operating Instructions Manual

Use the " " or " " button to navigate into the menu Speaker Setup [SPS] and press the "OK" button to confirm.
2
Select the menu Device Height [DHE] and confirm with the "OK" button.
3
Select with the "+" or "–" button to select the corresponding device height and confirm with the "OK" button.
4
To leave the menu, press the menu button "M".
5

2. System Setup [SYS]

The second item in the main menu is the System Setup. It contains the following menu items:

• Sleep Timer [SLP]

• IR Menu [IRM]
- IR Learn [IRL] - Discrete Input Learn [DIL]
• CEC [CEC]
• Standby Mode [STB]
• Input Config [INP]
- Input Name [NAM]
• Input Select[SEL]
• Sub Output [OUT]
• Lip Sync [LIP]
• Max Volume [VOL]
• Displaysetup [UIS]
- Language [LAN] - LED Flashing [LED]
• Playmode [PLM]
• Factory Reset [RES]
- OTA Recovery [OTA]
Sleep Timer [SLP]
If this function is enabled, the Soundbar 10 shuts down into standby mode after a specified time. You can choose between 15 [15M], 30 [30M], 45
[45M] or 60 [60M] Minutes. If the value [OFF] is selected, the function is disabled.
To adjust the shut down time, please follow the next steps:
To enter the menu, press the "M" button.
1
- IR Clear [CLR]
- Analog Gain [OFS]
- Input Stream Display [ISD] - Slavedisplay [SUI]
English
3 9 3