Canton Smart Soundbar 10 Operating Instructions Manual page 114

English
not be used to draw conclusions of usage behaviour or of the user.
Notes: • To activate the logging-function an empty FAT32-formatted USB-Memorystick (USB-A) is required.
To activate the USB logging-function, please do the following:
Insert the USB stick into the USB connector on the rear panel of the Soundbar 10.
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate into the menu System Info [INF] and confirm with the "OK" button.
3
Use the " " or " " button to navigate into the menu USB Logging [LOG] and confirm with the "OK" button.
3
Activate [ON] the logging-function using the "+" or "–" button and confirm with the "OK" button.
4
From now on the input streams and the operating status of the Soundbar 10 are logged in real time and written into the log-file.
Note: • Leave the USB stick connected with the Soundbar 10 as long as agreed with the Canton customer support.
Deactivate [OFF] the logging-function using the "+" or "–" button and confirm with the "OK" button.
5
Remove the USB stick from the Soundbar 10.
6
Leave the menu item by pressing the "M" button.
7
Note: • Please do only create a log-file after consultation with the Canton customer support.
114