Preset Buttons - Canton Smart Soundbar 10 Operating Instructions Manual

Hide thumbs Also See for Smart Soundbar 10:
Table of Contents

Advertisement

Available languages

Available languages

Preset Buttons 1-3 (Presets)
The Soundbar 10 is able to assign three memory buttons with „presets". Settings like volume, selected input and settings in the Speaker Setup [SPS]
menu (sound settings, etc.) as well as playlists from the app „Spotify" can be stored. The memory buttons can be operated via the Smart remote
control as well as via the keypad on top of the Soundbar 10.
Practical tip:
• We recommend that you store the settings you have made in the loudspeaker menu during the initial set-up of the Soundbar 10, e.g. regarding
loudspeaker levels and distances, sound settings, etc., to one of the three preset buttons so that your settings are not overwritten by the
factory (neutral) settings if you accidentally press one of the preset buttons.
To store playlists and/or (sound)settings, please proceed as follows:
Please apply the desired settings regarding volume, sound, input, etc. and press and hold the memory button 1, 2 or 3 until the corresponding
1
number [P1], [P2] or [P3] is shown in the display and no longer flashes.
To store a playlist, please open the desired playlist on the app „Spotify" on your (mobile) device and start playback. Be sure to select Spotify
2
Connect as your connection to Soundbar 10, not Chromecast built-in. Now, please press and hold the corresponding memory button 1, 2 or 3
until the corresponding number [P1], [P2] or [P3] is shown in the display and no longer flashes. Storing a playlist automatically stores all (sound)
settings, too.
To recall the settings resp. a playlist from these presets, please press the corresponding button 1, 2 or 3 briefly. The settings are then called up,
3
resp. the tracks from the stored playlist are played back automatically by the Soundbar 10 (even without using your (mobile) device).
Note:
To delete the settings or a playlist from a preset button, please press and hold the relating button for 10 seconds until the corresponding
preset [P1], [P2] or [P3] is shown in the display rapidly flashing.
English
3 8 5

Advertisement

Chapters

Table of Contents
loading

Table of Contents