Table of Contents
Advertisement
Installing the bezel
Hardware Install Guide for FortiScan
http://docs.fortinet.com/
5 Swing the CMA back in to place on the tray (5).
Figure 12: Cabling the system using the CMA
2
3
6 Install the status indicator cable at the back of the system and secure the cable by
routing it through the CMA. Attach the other end of this cable to the corner of the outer
CMA basket. (6).
A lock on the bezel restricts access to the power button, optical drive, and hard drives. The
LCD panel and navigation buttons are accessible through the front bezel.
To remove the front bezel
1 Using the system key, unlock the bezel.
2 Pull up on the release latch next to the key lock.
3 Rotate the left end of the bezel away from the system to release the right end of the
bezel.
4 Pull the bezel away from the system.
To install the front bezel
1 Insert the hinge tab on the right of the bezel into the slot on the right side of the system
front panel.
2 Rotate the left side of the bezel toward the system.
3 Press the bezel to the system to engage the latch.
Document feedback
•
1
6
5
4
19
Advertisement
Table of Contents
