Table of Contents
Advertisement
6 ONU LAN configuration
when ONU in route mode.
6.1 LAN IP Address Configuration
the following parameters:
【LAN IP Address】 Set the local management IP address of the ONU. The default is
【Subnet Mask】Set the subnet mask corresponding to the local management IP
【Enable DHCP Server】Enable or disable the DHCP server function on the ONU.
【DHCP Start IP Address/DHCP End IP Address】The IP address interval allocated
Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
The LAN side configuration of the ZTE solution ONU is mainly for terminal device
1.web login ONU and select the Network -> LAN -> DHCP Server, And then set
192.168.101.1
address of the ONU.
to the terminal. The address interval must be on the same network
16
Advertisement
Table of Contents
Need help?
Do you have a question about the EPON SFU and is the answer not in the manual?
Questions and answers