Chapter 3 Print; Lamps And Switch; Ready (Paper) Lamp - Brother HL-P2000 User Manual

CHAPTER 3
PRINT

LAMPS AND SWITCH

This section refers to the following lamps and switch on the machine
control panel.
Note
When the power switch is off or the machine is in sleep mode, all lamps
including the Ready lamp are off.

Ready (Paper) Lamp

The Ready lamp indicates the current status of the machine.
Lamp
Blinking
Blinking
This lamp also works as the Paper lamp with the Alarm lamp. They
blink simultaneously to indicate a paper error.
Chapter 7.
Fig. 3-1 Lamps and Switch on Control Panel
Machine status
The power switch is off or the machine is in sleep
Off
mode. If the machine is in sleep mode, it will wake
up automatically when it receives data or you
press the control panel switch.
The machine is warming up.
(Blinking at 1 second intervals)
The machine is cooling down and stops printing
until the internal temperature lowers.
(Blinking at 2 seconds intervals)
The machine is ready to print.
On

CHAPTER 3 PRINT

See "Operator Calls"
3-1