Table of Contents
Advertisement
USER'S GUIDE
Copy
Question
The machine does not copy.
The machine copies, but
nothing is printed on the copy.
Copy has a vertical line.
Some portion of the image is
missing on the copy.
Memory full error.
Scan
Question
The machine does not scan
Computer indicates an error
message other than above.
Scanned image has vertical
white or black line.
7-14
Recommendation
Check the following;
The machine is turned on.
All of the protective parts have been removed.
The top cover is closed.
The Alarm LED is blinking. If the LED is
blinking, refer to the Operator Calls section of this
manual.
check if;
Original documents are inserted face down in the
document feeder.
The toner cartridge is not empty.
Clean the scanning unit refering to 'Cleaning the
Scanning Unit' section in Chapter 6.
The machine has unscannable and unprintable
areas. Check the areas in Chapter 2.
If the image is larger than the paper size, it may be
lost.
A DOS application is using download fonts and
the memory is almost full.
After a memory full error occurs, the machine
clears any downloaded fonts automatically.
Recommendation
Check the following;
The machine is turned on.
All of the protective parts have been removed.
The top cover is closed.
Check the following;
The machine is connected directly to the
computer.
The computer can work in bi-directional mode.
The scanner port is correctly set on your
computer.
The Scanner driver is correctly selected in your
application.
A recommended interface cable is being
used.(IEEE 1284 compliant)
Clean the scanning unit.
Advertisement
Table of Contents
