Table of Contents
Advertisement
INSTALLING OPTIONAL FLOW STRAPS
1. Optional Flow Straps can be used when processing thicker paper stock. To install, fold over 1/2 inch of
strap. (figure 8a)
2. Place strap over static brush in appropriate location. (figure 8b)
NOTE: Straps should not be placed where they will interfere with the conveyor belts or the weighted outfeed
tires, (see figure 11).
Figure 8a
3. With strap in place, press clip down over strap. (figure 9)
4. Figure 10 shows strap and clip in place.
NOTE: Clip must be removed before moving strap to a different location.
Figure 9
5. Repeat process on other side. Figure 11 shows two straps in place.
Flow
Strap
Figure 11
8
Figure 8b
Figure 10
Flow
Strap
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
Advertisement
Table of Contents
