Commissioning; Programming The Rts Transmitter - SOMFY Sonesse 40 RTS Manual

4 Commissioning

4.1 Programming the RTS transmitter

Switch on the power supply.
Press the UP and DOWN buttons simultaneously
on the RTS transmitter: the shade jogs (moves
up and down briefly) and the transmitter is
preprogrammed in the motor
4.2 Checking the rotation direction
1) Press the RTS transmitter UP button:
a) If the shade is raised (a), the rotation direction
is correct: move to the section entitled
«Adjusting the end limits».
b) If the shade is lowered (b), the rotation direction
is incorrect: move to the next step.
2) Press the RTS transmitter MY button until the
shade jogs: the rotation direction has been
modified.
3) Press the RTS transmitter UP button to check
the rotation direction.
4.3 Adjusting the end limits
The limits can be set in any sequence.
1) Press and hold the UP button to move the
shade to the desired Up position. If necessary
adjust the Up position, using the UP or DOWN
buttons.
2) Press the MY and DOWN buttons
simultaneously and release them once the
shade begins to move. The up limit is
memorized.
3) Press the MY button when it reaches the
desired Down position.
If necessary adjust the down position, using the
UP or DOWN buttons.
4) Press the MY and UP buttons simultaneously
and release them when the shade begins to
move.
The Down limit is memorized. The shade
moves up and will stop at its upper limit.
5) To confirm the end limits press and hold the
MY button until the shade jogs.The end limits
are recorded.
Copyright © 2011 Somfy SAS. All rights reserved - V0 - 06/2011
1
a
=
b
=
2 3
1 2
4
3
5
5