Hw Self Test Failure; Oscillator Test Failure - Nokia 2366i Rf Description And Troubleshooting

2366i (RM-155)
RF Description and Troubleshooting
4. Open the Troubleshooting menu, and click GPS Quick Test. The GPS Control
dialog box appears
5. In the Test State field, ensure that Galvanic is selected.
6. Click select Start test.
See Figure 47

HW Self Test Failure

If the test fails, repeat steps 1—6. If the test fails again, continue with the following self-
test failure troubleshooting:
1. Verify the DC voltages at VRF_GPS and VDD_IO_GPS.
2. Inspect all GPS circuit elements around the GPS BB chip (D6200).
3. If the elements pass a visual inspection, replace the N6200.

Oscillator Test Failure

1. Inspect all GPS circuit elements around the N2651.
2. If the elements pass a visual inspection, replace the G6250.
Page 46
Figure 46: GPS Control dialog box
for the GPS test points.
Company Confidential Issue 2 - February 2007