Nokia Customer Care
GPS Troubleshooting Setup
Use the following steps to set up GPS signal using Phoenix.
1. On the Phone Control dialog box, click the LOCAL button in the Phone State
area to put the mobile terminal into Local Mode.
2. Click Execute.
3. Inject a -110dBm tone at 1575.52MHz at the GPS connector (X6250) with a
signal generator or call box.
Issue 2 - February 2007
Figure 44: Phone Control dialog box
Figure 45: GPS connector (X6250)
Company Confidential
RF Description and Troubleshooting
CW tone
2366i (RM-155)
Page 45