Nokia 2366i Rf Description And Troubleshooting page 15

Nokia Customer Care
4. Open the Troubleshooting menu, point to RF, and click RF Main Mode. The RF
Main Mode dialog box appears.
5. Select the following values on the RF Main Mode dialog box:
Band = Cell (CDMA)
•
Channel = 384
•
Mode = Rx/Tx
•
6. Click Set.
Note: Be sure that the "RF Main Mode set successfully" message appears in
the status bar.
7. Open the Troubleshooting menu, point to RF, and click CDMA Control. The
CDMA Control dialog box appears.
Figure 9: CDMA Control dialog box for Cell Tx troubleshooting
8. Select the following values:
State = Rho ON
•
• Band = Cell
Radio Configuration = Mode 1: IS-95 Voice
•
Note: Do NOT select the Set default PDM values option.
9. Click Execute.
Issue 2 - February 2007
Figure 8: RF Main Mode dialog box for Cell Mode
Company Confidential
RF Description and Troubleshooting
Do NOT select this option
2366i (RM-155)
Page 15