Tx Output Spectrum - Nokia 2366i Rf Description And Troubleshooting

Nokia Customer Care

Tx Output Spectrum

Following is the correct output of the mobile terminal on a spectrum analyzer with
100MHz span. Note that if you are using the AAS-10 probe with the mobile terminal
connected to the call box, the amplitude should be approximately -7dBm at the antenna
test point on the top of the PWB.
Following is an example of incorrect output.
Issue 2 - February 2007
Figure 10: Correct output spectrum
Figure 11: Incorrect output spectrum
Company Confidential
RF Description and Troubleshooting
2366i (RM-155)
Page 19