Overview; Hardware Supplied - Matrox NRG User Manual

Overview

Thank you for purchasing a Matrox NRG product. Matrox NRG is an external, rack-mountable, dual
redundant Power Supply Unit (PSU) which can be used to power virtually any 12 volt appliance
currently manufactured by Matrox Video, including the Maevex 6100 Series, Extio 3 Series,
QuadHead2Go Series, and Monarch EDGE Series.
Up to five appliances can be powered by a single NRG unit. The NRG units come equipped with two
300 watt power supply modules, either of which can be replaced without interrupting the power
output to the connected appliances. The modules include automatic load balancing which ensures
even usage of both power supplies and extends the life of each.
The single density solution ships with a single NRG unit installed on a 1U rack-mountable tray with
space for any ½ wide appliance to be installed next to it. The dual density solution includes two NRG
units installed on a single 1U tray.
Matrox NRG key features:
 2 x field-replaceable redundant power supply modules (300 watts each). You can
individually replace either power supply module without unplugging the other module,
ensuring a continuous 12 volt output to your connected devices.
 High density device capable of powering five units from a single PSU.
One (1) RU in height. One half (½) RU width.

 Comes pre-installed on a rack tray with the other half of the tray available for your
Matrox appliance.
 GPIO connection to signal a possible error condition.
 10/100 BASET Network connection to provide monitoring and control via management
software (Matrox or custom).
 Remote control via IP of each power output.
Recessed physical rocker switch (on-off) on the device.

 On device LEDs to display status.

Hardware supplied

Depending on your NRG device, the following hardware is supplied:
 One (1) or two (2) six-foot long power cables (DIN 4-pin male with lock).
Rack mountable NRG RPSU.

Matrox NRG User Guide 6