Matrox NRG User Manual page 10

3 Make sure that your Matrox NRG's two field-replaceable power supply modules are fully
inserted (they may have shifted or loosened during transport), then connect AC power
to one or both power supply modules.
LEDs are green
when power
supply modules
are active
As the Matrox NRG does not come with an IEC 60320 C13 power cable, you can use the
cable included with the Matrox appliance you intend to use with Matrox NRG, or any
locally sourced IEC 60320 C13 cable that meets local regulatory requirements.
Turn ON the Matrox NRG's front panel power switch to power on the 12V d.c. outputs.
4
The LED on the front will turn GREEN if both power modules are active, or blink
GREEN if one module is not functioning.
When the LED is green, your Matrox NRG is ready to provide power redundancy to Matrox
appliance(s).
Matrox NRG User Guide 10