Connecting To The Matrox Nrg User Interface - Matrox NRG User Manual

Connecting to the Matrox NRG user
interface
To control Matrox NRG, you connect to it via a web-based user interface. You must know the unit's
IP address to connect.
If you have the Matrox NRG-5-2DB model (i.e. two NRG units on the tray), each unit has its own
dedicated IP address. When you connect to one of the units, you will see an "A" or "B" as a suffix to
the device name. This suffix corresponds to the NRG unit's place on the tray which is also marked
with A or B.
Connect Matrox NRG to your network as described in
1
network" on page
Open a web browser (Google Chrome is recommended) and go to the IP address of your
2
Matrox NRG unit. If you see a warning that the website is not secure, you can disregard
it and proceed.
If you don't know your NRG unit's IP address, you can use the Matrox NRG updater
application to find it (see
Log in to Matrox NRG with your password. If this is your first time logging in, you will
3
be prompted to set your password.
The Matrox NRG page opens.
For more information on how to use the Matrox NRG user interface, click the
4
You are ready to use Matrox NRG.
13.
"Connecting Matrox NRG to your network" on page
"Connecting Matrox NRG to your
Matrox NRG User Guide 18
13).
link.
Help