"Overheating Protection" Function; Switching Off The Appliance; Device Control - Electrolux ECH/AG2-1000 3BE EEC User Manual

8
www.home-comfort.com
Setting up the Program
Select the day of
the week for
settings
Setting up the Custom
Choice of hours for
settings (allocated
7 hours)
"Parental control" function
Locks all buttons on the control panel. While
the instrument is operating, press and hold the
left and right arrow buttons simultaneously for
a few seconds. The lock indicator lights up on
the display. The Parental Control function
is activated. To disable the function, repeat
the same operation as to enable.

"Overheating protection" function

The device is equipped with an automatic
switch that is activated when the upper
temperature limit is reached. The heater
switches off automatically in case of
overheating. After eliminating the source
of overheating, the heater will turn on
automatically.

Switching off the appliance

To turn off the device, press the button
in any operating mode.
Schedule type
selection for
monday
Work mode
selection for a
specific hour
Schedule
example P1
Command
confirmation

Device control

Preparation for work
1. Carefully remove the heater from the
cardboard box.
2. Remove the colored stickers from the front
panel before use.
3. At the first start-up, some odor may
appear, which will disappear after the
convector starts to work.
4. Fix the device in a stable position
according to the assembly and installation
instructions.
5. After installing the convector, plug it into a
power outlet.
6. It is not recommended to use the same
electrical outlet for simultaneous plugging
in heater and other high power electrical
appliance.
Installation of the device
Recommended installation
The device must be fixed in accordance with
the regulations.
The switch and other mechanisms must
stay away from splashing water. It is strictly
forbidden to cover or plug the air inlets or
Command
confirmation
Set next hour for
settings