Download Print this page

Advertisement

Quick Links

342 N. Co. Rd. 400 East
Valparaiso, IN 46383
219-464-8818 • Fax 219-462-7985
www.heatwagon.com
Installation and Maintenance Manual
Please retain this manual for future reference.
HRF115
Infrared
Construction
Heater
SN 96004001 and beyond
C
US
For your safety: Do not use this heater in
a space where gasoline or other liquids
having flammable vapors are stored.
Revision 2-21

Advertisement

loading
Need help?

Need help?

Do you have a question about the HRF115 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Heat Wagon HRF115

  • Page 1 342 N. Co. Rd. 400 East Valparaiso, IN 46383 219-464-8818 • Fax 219-462-7985 www.heatwagon.com Installation and Maintenance Manual Please retain this manual for future reference. HRF115 Infrared Construction Heater SN 96004001 and beyond For your safety: Do not use this heater in a space where gasoline or other liquids having flammable vapors are stored.
  • Page 2: For Your Safety

    If you need assistance or heater information such as an instruction manual, labels, etc., contact your local Heat Wagon dealer or the manufacturer. Fire, burn, inhalation, and explosion hazard. Keep solid combustibles, such as build- ing materials, paper or cardboard, a safe distance away from the heater as recom- mended by the instructions.
  • Page 3: Warranty

    Wiring Diagram ..........13 WARRANTY All new Heat Wagon and Sure Flame heaters and fans are guaranteed against defective materials and work- manship for one (1) year from invoice date.
  • Page 4 A - without thermostat B - with thermostat...
  • Page 5 0.60 x 80 S 0.125” Fig 1...
  • Page 6 Mains must be fitted with a breaker switch. such as for example a thermostat is connected to the generator.
  • Page 7 fuel...
  • Page 8: Troubleshooting

    • Overheat thermostat • Replace (Fig1, pg. 5) (Fig1, pg. 5) If heater is still not working properly, please call Heat Wagon Tech Service.
  • Page 9 FOR 2 RED BLINKS CAUSE MAY BE: • No flame at 1st start up (review page 12 and 13) • Other causes may be defective over heat limit switch (check for continuity) FOR 4 RED BLINKS CAUSE MAY BE: • Photocell senses light before start- up (make sure cover is on and photocell installed properly) FOR 7 RED BLINKS CAUSE MAY BE: •...
  • Page 11 G11089 E50327-40 G11089 Bumper Phototransistor E50335 18” 14” 14 uF 7” 11.8” T20339 .60 x 80º S NOTE: Not shown ACC-THIDF Optional remote thermostat w/50’ cord BIE E10325 Slow fuse 6.3A...
  • Page 13 BIE E10325...