Part 4 Operation - Maxwell AutoAnchor 710-6 Owner's Manual

PART 4 OPERATION

4.1 AA710 BUTTONS
Thruster to port
4.1.1 TO TURN THE AUTO ANCHOR ON
console on. There will be a delay of a few
seconds while the remote console connects
to the network. The screen will be locked
and will display the last mode operated.
4.1.2 TO TURN THE AUTO ANCHOR OFF
display the menu.
OR
Note:
4.2 INFORMATION DISPLAYED DURING OPERATION
The length of rode deploye
4.2.1 BATTERY STATUS
operational capacity do not allow the battery status to drop to zero. All settings and
measurements are saved if the unit is turned off or if the battery fails.
details on battery replacement and care.
Thruster to
d
35
Mode & On/Off
Turn on
Hold to unlock
Tap for menu
application eg from windlass
to thruster
Hold 6 seconds to turn off
Clear to Zero
Chain or rope
-