3.4.2 SET UNITS
3.4.3 SET KEY BEEP
3.4.4 SET AUTO OFF TIME -
time for each console.
Note: Extending the time will shorten the life of the batteries.
Increase or decrease the time.
3.4.5 WIRELESS CHANNEL -
Do not use this setting unless you need to select a clear channel to avoid
interference.
Turn OFF all consoles prior to commencing this.
Channel changing should only be carried out close to the base station. The procedure
If contact with the base is lost - try again. The console will then scan for its base and
re-allocate the system to the new channel.
base stations will follow the master automatically.
Increase or decrease the channel number
If you have more than one console you must set the
23
console automatically switches off.