Flame Adjustment - Paramount Fitness BLT-999W-13/42 User Manual

LOCATION
The master power switch is located on the right side of the appliance. The control panel is on the right
corner of the glass.
MASTER SWITCH
The master switch controls the power supply to the appliance. Turn the switch to "I" to connect power
and turn the switch to "O" to cut the power. There will be a chiming sound when turning to "I".
1. POWER ON/OFF
Touch the button once (flame will light up) to turn power on for all functions, keep the last flame color once
appliance off. Touch the button once more to turn all functions off and flame off.

2. FLAME ADJUSTMENT

Touch the button to turn flame on. There are 10 levels in total to change colours. Press the button to
cycle through colour options. The display will show F1(orange) F2(orange and green), F3(green),
F4green and blue, F5(blue), F6(blue and orange), F7(blue and orange and green), F8(blue and red),
F9(red), F0 (all colours loop).
3. EMBER BED FIRE COLOR
Touch the button to turn the ember bed on. There are 10 colours in total. Press the button to cycle
through levels. The display will show C1,C2, etc...C0 (all colors loop).
4. HEAT SETTINGS
This fireplace consists of a fan forced electric heater with two heat settings: 700W ("LO" shown in display) and
1300 W ("HI" shown in display). Touch the button once (the icon will light up) to activate the heater at its low
level (700W). Touch the button once more to active the heater at its high level (1300W). When set in high level,
touch the button once again to deactivate the heater. Note: The fan will continue to run for a short time and turns
off automatically after the heater is turned off.
5. TIMER
This fireplace is equipped with a timer ranging from 1hr to 9hrs, in 1-hour increments (1H, 2H....9H is shown in
display). Touch the button once for every 1hr increments.
OPERATING INSTRUCTIONS
11