Glass Crystal Installation :
To avoid any risk of injury, it is recommended that two people install the glass onto the appliance. Always wear safety
glasses and gloves when handling glass.
1. To remove the outer glass panel from the bracket, undo the mounting screws from two sides(①、②)
and top ③ .
2. Remove the outer glass panel by lifting it up and off. ( ④ )
3. Gently put the glass crystals into place, spread the crystal carefully as shown below(⑤)
Note : The crystals may be covered with a fine white dust that needs to be cleaned prior to installation.
Clean the crystals with soapy water, rinse thoroughly and dry before placing into the tray.
4. Replace the front glass panel, replace the bracket screws on top and the two sides. (⑥)
10