Cleaning Coffee System" Programme; Descaling" Programme - Melitta CI Touch Operating Instructions Manual

Care and maintenance
9.6 "Cleaning coffee system"
programme
This cleaning programme is used to
remove residues and coffee oil residues
with the aid of coffee machine cleaning
agents.
To avoid damage to the appliance, we
recommend carrying out the cleaning pro-
gramme every 2 months or as requested
by the appliance.
Before starting the cleaning programme,
clean the brewing unit and the interior
(see section 9.3, page 46).
The cleaning programme takes approx-
imately 15 minutes and should not be
interrupted.
CAUTION
Contact with coffee machine cleaning
agent may lead to eye and skin irritation.
Observe the processing instructions on
ƒ
the packaging of the coffee machine
cleaning agent.
ATTENTION
The use of unsuitable coffee machine
cleaning agents can damage the appli-
ance.
Only use Melitta® PERFECT CLEAN
ƒ
cleaning tabs for fully automatic coffee
makers.
Requirement: The appliance is ready for
operation.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Cleaning coffee
system menu.
3. Select Start and confirm your selection.
4. Follow the further instructions on the
display up to the end of the cleaning
programme.
48
Mel_009_CI_Touch_20_de--kr_druck.indb 48

9.7 "Descaling" programme

The descaling programme is used to
remove limescale deposits in the interior
of the appliance with coffee machine
descaling agents.
To avoid damage to the appliance, we
recommend carrying out the descaling
programme every 3 months if a water
filter is not used. On use of a water filter,
perform descaling only when requested
by the appliance.
The descaling programme takes approx-
imately 25 minutes and should not be
interrupted.
CAUTION
Contact with descaling agent may lead
to eye and skin irritation.
Observe the processing instructions on
ƒ
the packaging of the descaling agent.
ATTENTION
Use of unsuitable descaling agent may
damage the appliance.
Only use Melitta® ANTI CALC liquid
ƒ
descaling agent for fully automatic
coffee makers.
Observe the processing instructions on
ƒ
the packaging of the descaling agent.
ATTENTION
A water filter may be damaged if it is
screwed in during the descaling pro-
gramme.
Remove the water filter when the appli-
ƒ
ance requests you to do so (see Fig. 18).
Place the water filter into a vessel filled
ƒ
with tap water during the descaling
programme.
The water filter can be reinserted and
ƒ
reused when the descaling programme
is complete.
14.09.2018 13:51:40