Selecting A Programme; Switching The Heater On And Off; Cleaning And Maintenance; Cleaning The Appliance - ULTIMATE SPEED SCM 1500 A1 Operating Instructions Manual

BB&3(B$XWRPDVVDJHB%ERRN 6HLWH  'RQQHUVWDJ  -XOL    
6.2

Selecting a programme

There are 8 programmes (MODE 1 – 8)
available altogether. The programmes vary
in their intensity, the area massaged and the
massage rhythm.
1. Press the MODE programme button|5.
2. The illumination of the remote control
will be activated.
3. Press the MODE programme button|5
again.
The appliance switches to the next pro-
gramme and the motors start to work.
The selected programme number is
shown in the LCD display|3.
6.3 Switching the heater on
and off
1. Press the heat button|7.
The illumination of the remote control
will be activated.
2. Switch the heater on by pressing the
heat button|7 again.
Heat will now be produced from inside
the massage mat.
3. To switch the heater off, press the heat
button|7 again.
7. Cleaning and main-
tenance
7.1

Cleaning the appliance

To ensure your product gives you lasting ser-
vice, you should clean it regularly.
!
DANGER
ger of an electric shock or
damage:
- Always disconnect the power supply
before cleaning.
- Never immerse the machine in water.
- Never allow water or cleaning agent
to run into the machine.
To avoid the dan-
~ CAUTION: Never use caustic or abra-
sive cleaning agents, as they could
damage the parts.
1. Unplug the power plug|11 from the
power socket|10.
2. Clean the massage mat|1 with a
clothes brush.
3. If badly soiled, clean the massage
mat|1 as well as the remote control|9
with a damp cloth. You could also use
a little mild washing-up liquid.
4. Wipe off with clean water.
5. Do not use the appliance again until it
is fully dry.
7.2 Changing the fuse in
the car lead
There is a fuse in the car lead|12 to protect
the car's electrical system. If there is no pow-
er supply and the car lead|12 stops work-
ing, you should check and, if applicable,
change this fuse.
1. Unscrew the cap on the top of the car
lead|12.
2. Remove the fuse.
3. Insert a new type F3AL 250V fuse.
4. Screw the car lead|12 together again.
37
GB