Table of Contents
Advertisement
Steps - commissioning, inspection and maintenance
Commissioning steps
Inspection steps
Maintenance steps
•
•
•
1. Burner inspection and maintenance................................................................................ 10
•
2. Checking the electrical connections................................................................................ 10
•
3. Filling the heating system with water and venting the system...................................... 10
•
4. Filling the trap with water.................................................................................................. 11
•
•
tightness............................................................................................................................. 12
•
6. Checking high limit safety cut-out settings..................................................................... 13
•
7. Checking the gas type....................................................................................................... 13
•
8. Setting the gas type........................................................................................................... 13
•
•
•
9. Commissioning the system............................................................................................... 13
•
•
•
10. Checking the flue gas damper.......................................................................................... 15
•
11. Reducing the maximum heating output (if required)...................................................... 15
•
•
12. Measuring the flue gas temperature................................................................................. 15
•
•
13. Shutting down the system................................................................................................. 15
•
•
•
14. Opening the boiler.............................................................................................................. 16
•
•
15. Opening the combustion chamber................................................................................... 17
•
•
16. Cleaning the combustion chamber and heating surfaces............................................. 18
•
•
17. Closing the combustion chamber.................................................................................... 18
•
•
18. Checking the filter element in the gas line...................................................................... 18
•
•
•
19. Checking the gas connections for tightness................................................................... 18
•
•
20. Cleaning the condensate drain pipe and trap................................................................. 19
•
•
21. Checking the condensate drain and the neutralising system (if installed).................. 20
•
•
22. Closing the boiler casing................................................................................................... 20
•
•
23. Checking the expansion vessel........................................................................................ 20
•
•
24. Checking the water quality................................................................................................ 20
•
•
25. Checking the gaskets on the flue gas side...................................................................... 20
•
26. Performing final checks..................................................................................................... 21
•
•
•
•
•
28. Check mixer (if installed) for ease of movement and leak-tightness............................ 21
•
•
•
•
•
•
30. Checking the flue system for unrestricted flow and tightness...................................... 22
•
•
•
31. Checking the installation room ventilation air apertures............................................... 22
•
32. Instructing the system user.............................................................................................. 22
Commissioning, inspection, maintenance
Page
9
Advertisement
Table of Contents
