Replacing The Ink Cartridges - Brother DCP DCP-110C User Manual

Replacing the ink cartridges

Your DCP is equipped with an ink dot counter. The ink dot counter
automatically monitors the level of ink in each of the four cartridges.
When the DCP detects an ink cartridge is running out of ink, the DCP
will notify you with a message on the LCD.
The LCD will inform you which ink cartridge is low or needs replacing.
Be sure to follow the LCD prompts to replace the ink cartridges in the
correct order.
Even though the DCP informs you that an ink cartridge is empty,
there will be a small amount of ink remaining in the ink cartridge. It is
necessary to keep some ink in the ink cartridge to prevent air from
drying out and damaging the print head assembly.
1
Lift the scanner cover from the right-hand side of the DCP until
it locks securely into the open position.
If one or more ink cartridges are empty, for example Black, the
LCD shows Ink Empty Black and Cover is Open .
2
Pull the ink cartridge hook toward you and remove the ink
cartridge for the color shown on the LCD.
Ink Cartridge
Hook
3
Open the new ink cartridge bag for the color shown on the LCD,
and then take out the ink cartridge.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 5 - 20
Empty
Ink Cartridge