Specifications; Installation Instructions - Uberhaus 68125105 Operator's Manual

Convector heater with built-in thermostat
Table of Contents

Advertisement

Available languages

Available languages

This convection heater is intended for permanent wall-mounting with the provided
brackets.
The heater has a thermal cut-off protection. If the thermal cut-off protection trips,
switch off the power. The unit should reset automatically after 10 minutes. If the
thermal cut-off protection trips again, determine the reason for overheating.
68125105
Model
ECH104-B-750
Volts
240 V AC
Watts
750 W
Height
17.52" (44.5 cm) 17.52" (44.5 cm) 17.52" (44.5 cm) 17.52" (44.5 cm)
Width
18.7" (47.5 cm)
Depth
5.12" (13 cm)
• Installation must be performed in accordance with the requirements of CEC by
authorized personnel only.
Tools required (not included)
• Electric drill
• Phillips (cross-head) screwdriver
• Tape measure
Do not install heater closer than 6" (15.3 cm) from to
a vertical or horizontal surface. This minimum
distance must be maintained. (Fig.1)

SPECIFICATIONS

68125106
ECH104-B-1000
240 V AC
1,000 W
22.64" (57.5 cm) 28.54" (72.5 cm) 34.84" (88.5 cm)
5.12" (13 cm)

INSTALLATION INSTRUCTIONS

68125107
ECH104-B-1500
240 V AC
1,500 W
5.12" (13 cm)
3
68125111
ECH104-B-2000
240 V AC
2, 000 W
5.12" (13 cm)
Fig.1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents