Operating Instructions; Specifications - Uberhaus 10625002 Operator's Manual

OPERATING
1. Before using the heater make sure that it is on a flat and stable surface. Damage may occur
if it is placed on an incline or decline.
2. Set the power switch to 0 (OFF) position and the thermostat to
into a socket-outlet.
3. Rotate the thermostat knob clockwise to
heater as follows: (I power－600 watts); (II power－900 watts); (I + II power－1500 watts); O for
power off.
4. When your room reaches the desired temperature, slowly rotate the thermostat knob
counter-clockwise until the pilot light goes out. The thermostat can now be left at this setting. As
soon as the room temperature has dropped below the set temperature, the unit will switch on
automatically, until the set temperature has been reached again. In this way the room
temperature remains constant with the highest energy efficiency.
5. If you want to change the room temperature setting, rotate the thermostat knob clockwise to
raise the temperature, or counter-clockwise to lower it.
6. This heater includes an overheat protection system that shuts off the heater when parts of
the heater are getting excessively hot.
7. To completely shut the heater off, turn all controls to O, and unplug the heater from the
socket-outlet.

SPECIFICATIONS______

Model Number
Power Supply
Power Consumption
INSTRUCTIONS____
CYAA55-7
120 volts AC, 60Hz
600 W (low heat setting)
900 W (medium heat setting)
1500 W (high heat setting)
_______........
.Then insert the plug
position and push the power switch of the
_______________.
6