• The shaver can be used for approximately 2 weeks with a full charge.
(Based on one 3‑minute dry‑shave usages per day in an ambient
temperature range of 20 °C – 30 °C.)
The number of usable days varies depending on the following
conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑ Usage frequency of the sonic vibration cleaning mode
• If there is noise from the radio or other sources while using or
charging the appliance, move to a different location to use the
appliance.
How to use
Shaving beard
1
Press
and shave�
• The "shaving sensor", which automatically
adjusts the power depending on the beard
thickness, will operate.
It will shave with high power on areas where
the beard is heavy, and reduce the power on
areas where the beard is thin, to reduce
burden on the skin.
• The power cannot be turned on when the switch lock lamp
(
) blinks, as the power switch is locked.
Press the power switch for more than 2 seconds to unlock.
(See page 11.)
10
ES-CT21_CIS.indb
10
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver over
the face against the grain of the beard.
• The beard under the chin and around the
throat can be shaved better by stretching
the skin so the beard will stand.
• To prevent damaging the system outer
foil, do not shave with only a part of the
system outer foil.
2
Press
when finished.
While using
Approximate amount of battery charge is
displayed as LOW – HIGH.
• It will turn off approximately 5 seconds after operating the switch.
• The shaving sensor lamp (
) blinks.
2017/09/25
20:44:03