Panasonic ES‑CT21 Operating Instructions Manual page 11

When the battery capacity is low
"LOW" blinks when operating the shaver.
• The appliance beeps twice after switched off.
• You can shave 2 to 3 times after "LOW" appears. (This will
differ depending on usage.)
Notes
• The appliance may not operate in an ambient temperature lower
than approximately 5 °C.
• The shaving sensor may not respond depending on the type and
quantity of the shaving gel. This is not abnormal.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
• The sonic vibration cleaning mode is activated when the power
switch is pressed for more than 2 seconds while the shaver is
not operating (the switch lock is unlocked). (See page 12.)
You cannot shave in this mode.
ES-CT21_CIS.indb 11
Locking/unlocking the power switch
Locking the power switch
1. Press once 2. Press
and then release. than 2 seconds until
• The shaver the switch lock lamp
starts operating. ( ) turns on.
• The shaver will
stop operating.
Unlocking the power switch
1. Press for more than
2 seconds until the switch
lock lamp ( ) turns off.
for more 3. Release .
• The switch
lock lamp
( ) will light
up for
5 seconds
and turn off.
2. Once the shaver starts
operating, release .
• The switch lock lamp ( )
will turn off.
11
2017/09/25 20:44:04