(Print): Printing Images Using A Printer - Sony NSC-GC1 Network Sharing Camera Handbook

Viewing menu
8 Select [OK] with B, then press the Multi-selector.
The mark turns white.
To cancel, select [Cancel] in step 4 or select [Exit] in step 8, then press the Multi-selector.
To remove the mark
To remove the mark from an image, select the image to remove the
same steps as when marking a
indicator disappears.
To remove all the marks in the folder
Select [All In This Folder] in step 4, then press the Multi-selector. Select [Off], then press the
Multi-selector.

(Print): Printing images using a printer

Even if you do not have a computer, you can print images shot using your camera by
connecting the camera directly to a PictBridge compliant printer.
• You cannot print movies.
Stage 1: Preparing the camera
1 Press MENU.
2 Select [USB Connect] in [Setup 2] with v/V/b/B on the Multi-selector.
3 Select [PictBridge] with v/V.
The USB mode is set.
Stage 2: Connecting the camera to the printer
1 Connecting the camera to the printer.
For details on the operation 1 page 34
mark on an image.
2 To the USB jack
USB cable
mark and take the
1 To the USB jack
47