Setup 1
1
The default settings are marked with
LCD Backlight
Selects the brightness of the LCD backlight when using the camera with battery.
Bright
Normal
• You can change the setting by pressing
• Selecting [Bright] uses up the battery charge faster.
Beep
Selects the sound produced when you operate the camera.
Shutter
On
Off
Language
Selects the language to be used to display the menu items, warnings, and messages.
Initialize
Initializes the setting to the default setting. Even if you execute this function, the images
stored in the internal memory are retained.
1 Select [Initialize] with v/V/b/B on the Multi-selector.
The message "Initialize all settings" appears.
2 Select [OK] with v.
The settings are reset to the default setting.
To cancel the resetting
Select [Cancel] in step 2.
• Make sure that the power is not disconnected during resetting.
For details on the operation 1 page 54
.
Brightens.
(Screen display switch) button longer.
Turns on the shutter sound when you press PHOTO.
Turns on the beep/shutter sound when you press the Multi-
selector, PHOTO or MOVIE button.
Turns off the beep/shutter sound.
59