Dpof: Adding A Print Order Mark - Sony NSC-GC1 Network Sharing Camera Handbook

Viewing menu For details on the operation 1 page 34
To cancel protection of all images in the folder
Select [All In This Folder] in step 4 of "To protect images in index mode", and press the
Multi-selector. Select [Off] with B.
• Note that formatting the "Memory Stick Duo" erases all data stored on the recording media, even if
images are protected, and these images cannot be recovered.
• It may take some time to protect an image.

DPOF: Adding a Print order mark

Adds (Print order) mark to images you want to print. By using the "Memory Stick Duo",
images with DPOF marks can be printed at photo shops or with printers which supports the
DPOF standard.
• You cannot mark movies.
Marking in single-image mode
1 Press MODE to set the playback mode.
2 Select the image you want to print.
3 Press MENU to display the menu.
4 Select [DPOF] with v/V on the Multi-selector.
(Print order) mark is attached to the image.
5 To mark other images, display the desired image with b/B, then press the Multi-selector.
Marking in index mode
1 Display the index screen.
2 Press MENU to display the menu.
3 Select [DPOF] with v/V.
4 Select [Select] with v/V.
5 Select the image you want to mark with v/V/b/B, then press the Multi-selector.
A green mark appears on the selected image.
Green mark
6 Repeat step 5 to mark other images.
7 Press MENU.
46