Charging The Built-In Battery - Sony NSC-GC1 Network Sharing Camera Handbook

1 Charging the built-in battery

The battery is built in within the camera.
•
1
Remove the insulation sheet.
2
Connect the AC Adaptor to the DC IN jack of the camera, making sure the
power is off.
3
Plug the power (mains lead) cord to a wall outlet (wall socket).
• The /CHG lamp lights on, and charging starts.
When the /CHG lamp turns off, charging is finished (Practical charge).
If you continue charging the battery for about one more hour (until it is fully charged), the charge will
last slightly longer.
1
Insulation sheet
/CHG lamp
2
DC IN jack
AC Adaptor
3
Power cord (mains lead)
15