Sony NSC-GC1 Network Sharing Camera Handbook page 61

Setup 2
Connecting the camera and your computer
Connect the camera as illustrated below.
2To the
NSC-GC3: You cannot input signals to your camera through the
To delete the USB connection
Perform the procedures listed below beforehand when:
• Disconnecting the USB cable
• Removing a "Memory Stick Duo"
• Inserting a "Memory Stick Duo" into the camera after copying images from the internal memory
• Turning off the camera
1 Double-click on the tasktray.
Double-click here
(USB Mass Storage Device) t [Stop].
2 Click
3 Confirm the device on the confirmation window, then click [OK].
4 Click [OK].
The device is disconnected.
• Step 4 is unnecessary for Windows XP.
(USB) jack
USB cable
For details on the operation 1 page 54
1To a USB jack
(USB) jack.
61