Setup 2; File Number; Usb Connect - Sony NSC-GC1 Network Sharing Camera Handbook

Setup 2

2
The default settings are marked with

File Number

Selects the method used to assign file numbers to images.
Series
Reset

USB Connect

Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the USB cable.
PictBridge
Web camera
Mass Storage
Connecting the camera and your computer with Mass Storage
"Mass Storage" mode lets a computer recognize the camera with "Memory Stick Duo" inserted as an
external memory device and enables you to operate the camera through the computer connected with a USB
cable.
60
For details on the operation 1 page 54
.
Assigns numbers to files in sequence even if the recording
folder or the "Memory Stick Duo" is changed. (When the
replaced "Memory Stick Duo" contains a file with a number
higher than the last assigned number, a number one higher
than the largest number is assigned.)
Starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
Connects the camera to a PictBridge compliant printer
(page 47). When you connect the camera to a computer, the
copy wizard starts automatically, and the images in the
recording folder on the camera are copied to the computer
(with Windows XP/Vista, Mac OS X).
Connect the camera and a computer with a USB cable and use
the camera as a webcam (USB streaming).
• Movies output will be 320×240 (30fps) Motion JPEG format.
• Movies streamed will not be displayed on the LCD screen of the
camera.
Establishes a Mass Storage connection between the camera
and a computer or other USB device.