Operation Panel; Air Conditioner Features - Mistral MA02016KRY30 Instruction Manual

Operation Panel

1. POWER: press this key to turn ON/OFF
machine. After machine turns ON, default
setting is cooling mode with low fan speed.
2. SLEEP: In cooling mode, press this key to turn
ON/OFF sleeping function.
3. MODE: after machine turns ON, press this key
to select either cooling, dehumidifying or fan
mode.
4. DOWN: In cooling mode, press this key to
reduce setting temperature from 31-16ºC.
5. DISPLAY: Shows the selected mode, set
temperature or the selected timer delay.
6. UP: In cooling mode, press this key to increase
temperature from 16~31ºC.
7. SPEED: after machine turns ON, press this key
to select fan speed (high, mid and low).
8. TIMER: In power-on or standby mode, press
this key in conjunction with UP/DOWN keys to
setup ON/OFF time from 1~24 hours.
9. SWING(air flow): after machine turns ON,
press this key, the air deflector will swing
continuously up and down; by pressing the
button again the movement will stop and
the air deflector remain in that position.
Indicators:
10. Water Full indicator
11. Power on/Standby indicator
12. Sleep indicator
13. Mode selection indicators
14. Fan speed indicators
15. Timer indicator
16. Swing operation indicator
Power
Timer
Swing
Sleep
°C/ °F: Switch between Centigrade and
Fahrenheit.
Operation of functions is the same when using
the remote or the control panel.

Air Conditioner Features

Cooling mode
In this mode, the exhaust hose MUST be installed
before using.
• After machine turns on, default setting is
cooling temperature of 22ºC with low fan
speed.
• Press " MODE" to select cooling mode,
"COOL" mode indictor turns ON .
• Press " UP" or " DOWN" to adjust temperature
( from 16ºC to 31ºC).
• Press "SPEED" to select high, mid or low fan
speed.
Fan mode
In this mode, there is no requirement to use the
exhaust hose. However, if you require stale or
smokey air to be removed from the room, install
the exhaust hose as described in the "Exhaust
hose installation" section.
• Press " MODE" to select fan mode, fan mode
indicator turns on and "FA" shows on display.
• Press "SPEED" to select high, mid or low
speed.
• In fan mode, the sleep function cannot
be activated and temperature cannot be
adjusted.
7
Down/Up
Mode
Speed