Table of Contents
Advertisement
Available languages
Available languages
3.3 Initial switch-on and making
settings with the setup wizard
1) Use the switch POWER to switch on
the unit . The message
a bar graph will be shown on the dis-
play . Then the setup wizard will ap-
pear:
Setup wizard
Start now?
YES
Notes:
1 . The unit is in the stand-by mode if only
the date and the time are shown on
the display after the switch POWER was
used . In this case, switch on the unit
with the button STANDBY (or
remote control) .
2 . If
Network settin g s
Please wait
Connectin g .
appears on the display, press the button
MENU, turn the knob CONTROL SELECT
to select the line
press the knob to call up the menu "Sys-
tem settings" . In the menu "System set-
tings", turn the knob to select the line
and press the knob to
Setup wizard
call up the setup wizard . Then continue
with step 2 .
3 . Instead of English, a different menu lan-
guage can be set (see chapter 3 .4 .1) .
4 . The wizard can be called up any time
via the menu "System settings" .
2)
is selected . Press the knob CON-
YES
TROL SELECT to confirm; the wizard
will start and the menu "Date / Time"
will appear:
Date/Time
12/24 hour format
12
The 24-hour format is selected for the
time (indicated by the asterisk
sired, turn the knob CONTROL SELECT
to select the 12-hour format . Press the
knob to confirm the format selected .
3) The menu for the automatic time up-
date will appear:
Auto update
Update from DAB
Update from FM
Update from Network
No update
The current setting is indicated by the
asterisk
(automatic time update via
*
the Internet) .
The other options are:
Automatic time update via DAB sta-
20
WELCOME
and
NO
Fig. 5
on the
and
System settin g s
24*
Fig. 6
) . If de-
*
*
Fig. 7
tion or FM station or manual time set-
ting (
No update
) .
Note: The time will only be updated auto-
matically when a corresponding station is
received . Therefore select the setting that
corresponds to the operating mode most
frequently used: If you listen to the digital
radio for most of the time, for example,
select
, or if you mainly
Update from DAB
listen to the Internet radio, leave the set-
ting
Update from Network
Confirm the current setting or se-
lect and confirm a different setting .
Depending on the setting selected,
one of the following menus will be
shown:
Update from DAB
or
FM
No additional time settings are re-
quired . Continue with step 4 . The
menu shown there (fig . 11) will
appear .
Update from Network
The menu "Set timezone" will ap-
pear:
Set timezone
UTC +00:00: Dublin, Lon
UTC +00:30:
UTC +01:00: Madrid, A...
UTC +01:30:
UTC +02:00: Athen, Kai ...
For Great Britain, the correct setting
has been selected:
UTC +00:00: Dublin, London
Confirm this setting or, for a differ-
ent country, first select the appro-
priate time zone and then confirm
your selection . The menu "Daylight
savings" will appear:
Dayli g ht savin g s
Dayli g ht savin g s
ON
OFF*
During the standard time, confirm
the setting
; for the daylight
OFF
saving time, select and confirm the
setting
. Continue with step 4 .
ON
The menu shown there (fig . 11) will
appear .
No update
The menu for the manual time set-
ting will appear:
Set Time/Date
01012007
00:00
The digits for the day will flash .
Turn the knob CONTROL SELECT
to set the day and then press the
knob to confirm . The digits for the
month will start flashing . Proceed
in the same way to set the month,
the year, the hours and the minutes
(and
AM
has been selected) . To return to the
previous setting, press the button
BACK .
4) When the final time setting has been
confirmed, the menu for permanent
connection to the network will appear:
unchanged .
Network settin g s
Keep network connected?
YES*
If
(factory setting) is selected, the
YES
connection to the network will always
be maintained (required when the unit
is to be controlled via the network,
e . g . by means of the app UNDOK™) .
If
is selected, the connection to the
NO
network will be disconnected when it
is not required, e . g . for FM reception
or in the standby mode (this will save
power) . Confirm the setting
select and confirm
*
Note: If the unit is to be operated without
any network connection (as described in
step 6A), it is recommended to select the
option
Fig. 8
NO
5) The following message will briefly
appear:
?
Then a list of regions for the network
setting will appear:
Wlan re g ion
Europe
Australia
Fig. 9
The line
Britain (or for a different country in
Europe), press the knob CONTROL
SELECT to confirm this setting .
6) The unit will search for a network:
Network settin g s
Then the menu with the networks
found will appear:
Fig. 10
SSID
[WPS]Cafeteria1
TechDocu
[Rescan]
[Wired]
[Manual confi g ]
or
PM
if the 12-hour format
NO
Fig. 11
YES
NO
.
.
Please select
Wlan re g ion
Fig. 12
Fig. 13
Europe
is selected . For Great
Network wizard
Scannin g /
Fig. 14
Fig. 15
or
Advertisement
Table of Contents
