Example: Configuring Inter-As Option A Md Vpn; Network Requirements - H3C S12500 Series Manual

#
interface Vlan-interface20
ip address 10.11.4.1 255.255.255.0
igmp enable
#
multicast routing
#
Example: Configuring inter-AS option A MD
VPN

Network requirements

As shown in
• Customer A has two branches that separately connect to AS 100 and AS 200.
ASBR-PE 1 and ASBR-PE 2 are interconnected by using the inter-AS option A solution.
•
PIM-SM runs within the two branches.
•
The multicast source and the receiver host are in different branches.
•
Configure inter-AS option A MD VPN so that the receiver host can receive the multicast data from the
source.
Figure 2 Network diagram
Table 2 Interface and IP address assignment
Device
S 1
PE 1
Figure 2:
Interface IP address
— 10.11.3.2/24
VLAN-interface 2 192.168.1.2/24
Device Interface
R 1 —
ASBR-PE
VLAN-interface 4
2
9
IP address
10.11.4.2/24
192.168.3.2/24