Download Print this page

Power Supply - Blodgett KLT-20G Specifications

Gas floor model tilting kettle

Advertisement

KLT-G FLOOR MODEL TILTING KETTLE
MODEL
A
B
KLT-20G
20[508] 48.13[1222] 40.63[1032]
KLT-40G
26[660] 55.25[1403] 43.63[1108]
KLT-60G
30[762]
59[1499] 45.63[1159] 17.88[454]
SHORT FORM SPECIFICATIONS
Provide Blodgett model KLT-20G (20 gallon), KLT-40G (40 gallon) or KLT-60G (60 gallon) gas fired tri-leg tilting kettle. The unit shall have a double wall interior to form a steam jacket
around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat cir-
culation. The console shall be drip proof, stainless steel clad and shall be mounted on 6" removable legs fitted with two hole adjustable flanged feet for securing to floor. The unit shall
pivot on trunions connected to the tilt mechanism and the outbore bearing connected to the gear and control consoles and shall permit the kettle to tilt forward a full 90° for complete emp-
tying. The tilt mechanism shall be self locking for positive stop action. Construction shall be of all welded satin finish 304 stainless steel. The controls shall be integrally mounted and shall
include a power switch, direct immersion thermostat water site glass with range of 165-275°F (74-135°C), a cook indicator light, pressure gauge, pressure relief valve, low water light
and low water shut off. Unit shall be ASME code stamped and National Board registered. Provide options and accessories as indicated.
MAXIMUM INPUT:
KLT-20G
80,000 BTU
KLT-40G
100,000 BTU
KLT-60G
120,000 BTU
GAS SUPPLY:
3/4" IPS supply line required
Minimum Inlet Pressure:
Natural
6.0" W.C. static to unit
Propane
11.0" W.C. static to unit
NOTE: The company reserves the right to make substitutions of components without prior notice.
Printed in U.S.A.
C
D
E
19[483]
40.13[1019] 76.5[1943]
16.5[419]
43.25[1099]
43.88[1115]
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
NOTE: FOR COMMERCIAL USE ONLY
F
G
H
16.5[419]
24[610]
76[1930]
15.5[394]
22.25[565]
82[2083]
19.5[495]
22.25[565]

POWER SUPPLY:

120VAC, 1 phase, 60 Hz., 2-wire w/ground
SHIPPING INFORMATION:
Approx. Weight:
KLT-20G
KLT-40G
KLT-60G
BLODGETT
APPROVAL/STAMP
J
K
L
11[279]
22[559]
40.5[1029] 18.38[467]
7.5[191]
23[584]
42.5[1080] 22.13[562]
5.5[140]
23[584]
45.5[1156] 24.75[629]
750 lbs. (340 kg)
980 lbs. (444 kg)
1195 lbs. (542 kg)
P/N S00013 Rev D (12/06)
M
N
25.5[648]
28.5[724]
30.5[775]

Advertisement

loading

This manual is also suitable for:

Klt-40gKlt-60g