Tools Screwdriver Needed; Tool Needed; Top Rail Hardware; Mounting Hardware - Arctic King MWFUK-05CMN1-BCK0 Operator's Manual

Fig. A
INNER
WINDOW SILL
INTERIOR
WALL

Mounting Hardware

3/4-in. or 1/2-in. Lock frame Sash lock
screws (2)
(7)

Top Rail Hardware

or
3/8-in. screws
(4)
Fig. B
Packaging
Fig. C

Installation Instructions

Your air conditioner is designed to be installed in standard
double hung windows with openingwidths of23 to 36 in.
(584 mm to 914 mm) (see Fig.A).
23-36 in.
584mm to 914 mm
The lower sash must open sufficiently to allow a clear
vertical opening of 13 in. (330 mm). Side louvers and
rear of the air conditioner must have clear air space to
allow enough airflow through the condenser for heat
removal. The rear of the unit must be outdoors,
Wooden windows
not inside a building or garage.
NOTE: Save the box and these Installation Instructions for
future reference. The box is the best way to store the unit
during winter or when not in use.

TOOLS SCREWDRIVER NEEDED:

Phillips
Drill (i f pilot holes are needed)
Window sash
(1) seal foam
CAUTION: When handling the unit, be careful to avoid cuts
(1)
from sharp metal edges and aluminum fins on front and rear
coils.
Top rail
(1)
Before installing the unit, the top rail must be
assembled on the unit.
TOOL NEEDED: Phillips screwdriver
Top rail
A: Remove the air conditioner from the box nd place
B: Remove the top rail from the side of the packaging
Fig. D
on a flat surface.
material as shown in Fig.B.
C: Align the holes in the top rail with those in the
top of the unit as shown in Fig. C.
D: Secure the top rail to the unit with 3/8-in.
screws as shown in Fig. D.
NOTE: For safety reasons, all four screws
MUST be securely tightened.
7