System Presentation; Brief Description; Display; Operating Elements - Bosch Rexroth VDP 92.1 Manual

VDP 92.1
1

System Presentation

1.1

Brief Description

1.2

Display

1.3

Operating Elements

1.4 Using the Machine Operator Panel with Display in
Residential Areas
1.5

Commissioning

DOK-SUPPL*-VDP*92.1***-PR02-EN-P
The machine operator panel VDP 92.1 is a compact combination
consisting of a TFT display and operating elements for the manual
machine operation.
The VDP 92.1 is a customer-specific development.
The display of the VDP 92.1 can be connected with the industrial PCs of
Rexroth like the IndraControl VSB 40 or the IndraControl VPB 40 via a G4
display interface.
The operating elements of the VDP 92.1 serve to operate the machines
manually. They provide an emergency stop pushbutton, USB connection,
key switch, feed override or handwheel functionality (depending on the
position of the key switch) and pushbuttons.
VDP 92.1-type installations that are used in residential areas (housing,
business and commercial areas as well as small-sized enterprises)
require a single approval by an authority or a testing agency. In Germany,
such single approvals are issued by the "Regulierungsbehörde für
Telekommunikation und Post (RegTP)" (German Regulatory Authority for
Telecommunications and Posts).
Mount the VDP 92.1 properly (for this, see chapter 5.2, "Installation", on
page 5-3). Then, connect the device to the power supply and, if required,
to the network.
1-1
System Presentation