Leica PROVIDO User Manual page 45

9.3.2 Setting the "Main" start values
For the selected user you can set the start values for the illuminator,
working distance and magnification on this screen.
Clicking the or
X
increments of one. Holding down the button with your finger
changes the value in increments of five.
You can also set the desired value by directly clicking the bars.
X
Brightcare Plus
Set the status of the BrightCare Plus safety function for the
X
selected user.
button changes the values in
PROVIDO Ref. 10732418 / Version 03
9.3.3 Setting the "Speed" start values
For the selected user you can set the start values for the travel
speed of the magnification, working distance and XY motors on this
screen.
Clicking the or
X
increments of one. Holding down the button with your finger
changes the value in increments of five.
You can also set the desired value by directly clicking the bars.
X
Intelligent Focus Speed
If "Intelligent Focus Speed" is activated, the focus speed
X
automatically adapts to the current magnification.
High magnification
Low magnification
Intelligent XY Speed Linked to Zoom
If "Intelligent XY Speed Linked to Zoom" is activated, the
X
xy speed depends on the current magnification.
High magnification
Low magnification
WD Reset
Set the default settings for WD-Reset.
X
If "WD Reset" is activated, the working distance motor
automatically moves to the working distance saved for each
user in the user settings when "All Brakes" are released.
This function is deactivated in the factory default configuration.
Clicking the "WD Reset" button activates/deactivates the
X
"WD Reset" function and the color of the button changes to
green (activated) / gray (deactivated).
Control unit with touch panel
button changes the values in
low speed
high speed
low speed
high speed
43